Converse HVAC Company handles heating and cooling for homes, rental properties, and commercial buildings across Converse and Bexar County. Whether the air conditioner stopped cooling, the furnace won't turn on, or you are planning a full system replacement, this is the call to make. Built for homeowners. Ready for property managers. Ready for your system.
You do not need to know what is wrong before you call. Describe what the system is doing, and the person who answers can help you figure out the next step. The HVAC work is done properly, start to finish.
Call (830) 590-9782 for a quote. Call us and we'll walk you through your options.
A home that heats and cools right is a comfortable home, and keeping it that way covers more ground than a single repair call. We handle the full range of residential and commercial heating and cooling work across the area.
On the residential side, that includes:
For commercial properties, we service rooftop units (RTUs), handle commercial heating and cooling repairs, and schedule maintenance for property managers who need work done on a timeline that fits their tenants.
Boilers are part of the range as well. A boiler heats the living space through hydronic or radiant systems, and that puts it squarely on the HVAC side of the work. We'll handle the system so you don't have to.
The hardest part of an HVAC problem is knowing when to call, especially when the system is still running but not doing what it should. If the AC is blowing warm air, the furnace is cycling on and off without reaching temperature, or the heat pump is running constantly without heating or cooling the space, those are all worth a call.
Common faults we diagnose and repair include:
The price is confirmed on the call, and the scope is settled before the visit starts. When a fault is found, you get the reason explained, not just the fix. That matters when the question is whether to repair or replace: the diagnostic covers what is wrong, what it will take to correct it, and whether the age and condition of the system make replacement the better call. You get a straight answer either way. Reach out and we'll start at the unit.
Calling an HVAC company doesn't have to be stressful, and the pricing conversation should not be the part that gives you pause. When you call, you get the rate before anything is scheduled. The scope of the visit is confirmed before work begins, and you can ask what the price covers and get a direct answer.
That applies whether you are calling about a diagnostic fee, a repair estimate, a replacement quote, or a seasonal tune-up. Commercial property managers can ask about service-call costs and maintenance pricing the same way a homeowner would.
Book the visit. Know the scope. Know the rate.
We do not quote blind. The call is where the pricing conversation starts, so you are not waiting until the visit is over to find out what something costs.
South-central Texas puts real demands on heating and cooling equipment. The summers are long and humid, the winters are short but cold enough to matter, and a lot of the housing stock in Converse was built when energy efficiency standards were different. The three services below come up most often here for good reason.
When a system has been repaired more than once in a season, or when the equipment is old enough that it runs on refrigerant no longer in production, replacement is often the more practical path. Older R-22 systems in particular are worth evaluating: the refrigerant is no longer manufactured, and repair costs reflect that scarcity. A properly sized replacement improves airflow and comfort throughout the home, not just the temperature reading on the thermostat. We handle the equipment installation and make sure the new system is matched to the space it is conditioning.
Converse winters are mild enough that a heat pump handles heating efficiently without the fuel cost of a gas furnace. In summer, the same unit runs as a central air conditioner. For homes replacing both the furnace and the AC at the same time, a heat pump installation covers both in a single project. Ducted central heat pump systems work with existing ductwork where it is in good condition. Ductless mini-split systems are the right call for additions, converted spaces, or buildings without existing ducts. The system is tested before the visit ends.
Bexar County summers bring humidity that a standard air conditioner was not designed to fully manage on its own. When indoor humidity stays high even with the AC running, the house feels warmer than the thermostat reads, and prolonged moisture creates conditions that affect air quality and surfaces throughout the home. A whole-home dehumidifier integrated with the HVAC system addresses this at the source, rather than managing it room by room with portable units. This work connects directly to indoor air quality: controlling humidity is one of the most effective things you can do for the air inside the home.
Comfort problems don't wait, and neither do we. When the furnace stops working in January or the AC goes out in July, that is not a call to put off until next week. We take emergency calls every day from 7:00 AM to 8:30 PM.
When you call, the scope is confirmed on the phone. The price is settled before the visit starts. Work begins at the unit, not after a lengthy assessment process.
If the system is down and the house is not livable, call (830) 590-9782 and we will get the visit on the schedule.
Your time matters, so we keep the HVAC job moving. A tune-up scheduled before the season changes is the most straightforward way to avoid an emergency call in the middle of summer or a cold snap.
A spring AC tune-up covers coil cleaning, refrigerant level check, blower and motor inspection, condensate drain check, and thermostat calibration. A fall furnace tune-up covers the heat exchanger, ignitor, airflow, and the same thermostat and blower checks. These visits catch faults like a failing capacitor or a clogged evaporator coil before they take the system down during peak demand.
Both homeowners and property managers schedule annual maintenance through us. If you manage multiple units or properties in the Converse area, we can work through what scheduling looks like when you call.
A thermostat that is not responding, not holding temperature, or not communicating with the system correctly is worth addressing on its own. We install programmable and smart thermostats, and we handle the low-voltage control wiring on the HVAC side of the connection. If the thermostat is the problem, we diagnose it and replace it. If the issue is upstream of the thermostat, we find that too.
Leaking ducts are one of the most common sources of comfort complaints in this area. A system that is running correctly at the unit can still underperform if conditioned air is escaping into unconditioned space before it reaches the rooms. Duct sealing and ductwork repair bring the airflow into balance and reduce the load on the equipment itself.
Indoor air quality work includes whole-home air filtration, UV air purifiers, air scrubbers, and filter replacement. Bexar County allergens and the humidity that comes with a Texas summer both affect what the air inside a home feels like. Addressing filtration and air treatment as part of the HVAC system is a more complete solution than standalone devices.
We serve Converse and the surrounding communities throughout Bexar County, including Schertz, Universal City, Selma, Live Oak, Kirby, Windcrest, Cibolo, and San Antonio.
If you are not sure whether your address falls within our service area, call (830) 590-9782 and we will confirm it on the call. Most of the northeast San Antonio corridor is covered.
Yes. We take calls and schedule visits every day of the week, including Saturday and Sunday, from 7:00 AM to 8:30 PM. Weekend availability is the same as any other day.
Call (830) 590-9782 to find out what is open on the schedule.
A system that has needed more than one repair in a single season, or one that runs on refrigerant that is no longer manufactured, is worth evaluating for replacement. During a diagnostic visit, the technician looks at the age and condition of the equipment and gives you a straight answer on whether repair or replacement makes more sense for your situation. The cost of both paths is confirmed before any work is scheduled.
When you call during our hours, 7:00 AM to 8:30 PM every day, you reach someone who can discuss the job, scope the problem, and confirm pricing before anything is booked. The call is where the pricing conversation starts, so you are not waiting until the visit is over to find out what something costs.
Call (830) 590-9782 to get started.
Warm air blowing from the vents when cooling is set, a system that cycles on and off without reaching the set temperature, weak airflow from the registers, or unusual sounds from the air handler or outdoor unit are all worth a call. These symptoms often point to a specific fault that gets worse if the system keeps running. Call us and we will walk you through your options based on what the system is doing.
Yes. We work with homeowners, property managers, and commercial clients across Converse and Bexar County. Commercial work covers rooftop unit repair and service, commercial heating and cooling repair, and maintenance for properties that need work scheduled around tenant or business hours. The scope and price are confirmed on the call the same way they are for residential jobs.
Pricing depends on what the diagnostic finds: the part, the refrigerant charge, the age of the equipment, and the scope of the work. What does not vary is the process. You get the rate on the phone before the visit is scheduled, and the diagnostic fee is confirmed upfront. Once the fault is identified, you get a clear explanation of what the repair involves and what it costs before any work is agreed to.
Call us ahead of time and we will work through the access details on the call. The technician who comes out needs to reach the air handler, furnace, or outdoor unit, so access to those areas needs to be arranged before the visit. We confirm what is needed when the appointment is booked.
If the diagnostic uncovers a fault that is broader than what the initial call described, that becomes a conversation before the work continues, not after it is done. Additional costs can come from parts that need to be ordered, refrigerant that needs to be added, or related components that turn out to be part of the same failure. Nothing is added to the scope without your agreement first.
Deposit requirements depend on the scope of the job and are confirmed on the call before anything is booked. For larger jobs like full system replacements, deposit terms are discussed and agreed to upfront.
Call (830) 590-9782 and ask what applies to your specific job.
Call (830) 590-9782 as early as you can and we will work out a new time.
We understand that schedules change, and rescheduling is handled on the call. The sooner you reach out, the more options we can offer on the new timing.
Yes. Older homes in the Converse area often have systems that were sized to standards that no longer reflect the home's current layout or load. The diagnostic covers what the existing equipment is doing and whether the system is matched to the space. If the sizing is off or the equipment is past its useful life, replacement options are discussed and quoted before any work starts.
A home that heats and cools right is a comfortable home, and getting there starts with a single call. We serve Converse, Bexar County, and the surrounding communities including Universal City, Schertz, Live Oak, Selma, Kirby, and San Antonio.
We are available every day from 7:00 AM to 8:30 PM for repairs, replacements, tune-ups, and new installations. System tuned. Airflow balanced. Home comfortable.
The HVAC work done properly, start to finish, is what every call is aimed at.
Call (830) 590-9782 for a quote.
We handle the full range of heating and cooling work for homes and commercial properties in Converse and the surrounding Bexar County area. Whether you need a quick repair, a seasonal tune-up, or a full system replacement, the scope and the rate are confirmed before anything is scheduled. The table below covers what each service involves, who it fits best, and what is practical to know before you call.
| Service | What It Covers | Best For | What to Keep in Mind |
|---|---|---|---|
| AC Repair & Service | Refrigerant pressure check, Condenser and compressor inspection, Evaporator coil condition, Airflow through the system | Homeowners with a system blowing warm air or short-cycling in summer heat | Catching a refrigerant or airflow problem before the system shuts down completely usually costs less than an emergency call |
| Heat Pump Repair & Service | Full refrigerant circuit check, Reversing valve inspection, Defrost cycle verification, Control-side diagnostics | Properties with a heat pump that is not heating, not cooling, or running without moving enough air | Heat pump faults often look like other problems, so a systematic diagnostic is the right starting point |
| Seasonal Maintenance & Tune-Ups | Refrigerant charge and coil condition, Drain line and electrical connections, Ignition and heat exchanger check, Filter and blower inspection | Homeowners who want to catch worn parts before they cause a breakdown mid-season | A spring AC tune-up and a fall furnace tune-up together cover the equipment before the two heaviest-use seasons in Converse |
| Heat Pump Installation | Equipment sizing for the space, Refrigerant line set installation, Air handler placement, Thermostat low-voltage wiring | Bexar County homes looking for efficient heating and cooling in a mild-winter, long-summer climate | An oversized heat pump short-cycles and leaves humidity in the air, so sizing is confirmed before the visit is scheduled |
| Emergency HVAC Service | No-heat and no-cool calls, After-hours emergency scheduling, System-down diagnostic, Priority visit arrangement | Any situation where the system is completely down and waiting is not an option | We take emergency calls every day from 7:00 AM to 8:30 PM, describe what the system is doing and we will tell you what to expect |
| Thermostat & Smart-Control Installation | Failed thermostat replacement, Smart or programmable control wiring, Low-voltage terminal connection, System compatibility confirmation | Homeowners whose thermostat reads the wrong temperature or will not hold a schedule | Compatibility with the existing HVAC equipment is confirmed on the call before the visit is booked |
| Whole-Home Dehumidification & Humidity Control | In-line dehumidifier installation, Moisture load assessment, Integration with existing HVAC system, Independent humidity cycle operation | Homes where the air feels heavy even when the thermostat is set correctly | An oversized or short-cycling AC does not run long enough to pull humidity down, a dedicated dehumidifier handles moisture independently |
| Heating & Furnace Repair | Ignition system check, Heat exchanger condition, Blower motor inspection, Airflow through the cabinet | Homes where the furnace will not ignite, runs cold, or shuts off before reaching temperature | Furnaces that have not been serviced recently are more likely to develop a fault during a cold stretch |
| Full System Installation & ReplacementMost Popular | Load calculation for the space, Equipment selection for existing infrastructure, Refrigerant line set and air handler placement, Low-voltage control wiring at the thermostat | Homeowners whose system has reached end-of-life or whose repair costs are stacking up | In Converse, a paired furnace-and-AC setup sized for a long cooling season and mild winters is the most common replacement path |
| Indoor Air Quality & Air Filtration | Media filter installation, Electronic air cleaner setup, UV system installation, Integration with existing HVAC airflow | Households concerned about airborne particulates or overall air quality inside the home | The right filtration approach depends on what the existing system supports, confirmed on the call before the visit |
| Ductwork Repair & Sealing | Accessible duct run inspection, Joint and connection sealing, Air handler connection repair, Airflow balance check | Homes with uneven room temperatures or a system that runs longer than it should | Leaking ducts push conditioned air into attic or wall cavities before it reaches the rooms, raising energy use and runtime |
Call (830) 590-9782 and we will walk through your system, confirm the scope, and give you the rate before anything is scheduled.
(830) 590-9782